Hand Router H-703 for PVC Edge Processing

Professional edge router H-703 complete with platform and R2 cutter . Designed for milling edge overhangs formed after gluing chipboard ends with PVC edge of various thicknesses. Perfectly proved at many furniture enterprises.

Design advantages:

1. The professional rotor and stator allows you to achieve high power.
2. Carbon brushes increase tool life compared to analogues.
3. The support platform is shaped with an opening that specifically allows the projections to pass through when feeding.
4. The side handle ensures the stability of the clamp, as well as the convenience of holding the router during the movement itself.
5. The working abradable part is presented in the form of a separate lining that can be changed.
6. The clamp is made by means of a collet, the hole size is 6.35 mm.
7. Convenient forms of working height adjustment - just turn the head around the body. After the desired value has been set, it is fixed by tightening the screw with the eccentric lever, which improves accuracy and also eliminates displacement .
8. The power cable is protected by the most elastic insulation , and its length is two and a half meters.
9. The low weight of the device ensures practical operation, as well as minimizing operator fatigue.

Specifications:

• Power - 350 W.
• The seat for the cutter is 6.35 mm.
• Rotation speed - 24000 rpm.
• Dimensions - 35x15x15 mm.
• Weight - 1.5 kg.