Compare 0 Wishlist 0

Cutters for cutting plywood, MDF, chipboard

Diamond router cutters for chipboard cutting
Diamond router cutters for chipboard cutting
Carbide router cutters for cutting
Carbide router cutters for cutting
Sort By:
Diamond router cutter 12x25x75x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
-17%
In stock
Bestseller
Popular
Special
Diamond router cutter 12x25x75x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Product code: 920
4
54.00€ 45.00€
Cutting diameter, mm: 12
Cutting height, mm: 25
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: PCD
Diamond router cutter with coating 8x21x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter with coating 8x21x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
Product code: 1917
3
198.00€
Cutting diameter, mm: 8
Cutting height, mm: 21
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: PCD
Nesting carbide cutter with coating CL-07 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
-26%
In stock
Bestseller
Popular
Special
Nesting carbide cutter with coating CL-07 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 3145
8
24.30€ 18.00€
Cutting diameter, mm: 6
Cutting height, mm: 20
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: carbide
Nesting carbide cutter with coating CL-17 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
-26%
In stock
Bestseller
Popular
Special
Nesting carbide cutter with coating CL-17 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 3811
Write a rewiew
24.30€ 18.00€
Cutting diameter, mm: 6
Cutting height, mm: 20
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: carbide
Diamond router cutter with coating 10x22x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
In stock
Bestseller
Diamond router cutter with coating 10x22x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
Product code: 1916
1
198.00€
Cutting diameter, mm: 10
Cutting height, mm: 22
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: PCD
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
In stock
Bestseller
Popular
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 1925
10
28.80€
Cutting diameter, mm: 6
Cutting height, mm: 20
Total length, mm: 80
Shank diameter, mm: 12
Cutting part material: carbide
Nesting compression carbide cutter with coating CL-15 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
In stock
Bestseller
Popular
Nesting compression carbide cutter with coating CL-15 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 3432
Write a rewiew
28.80€
Cutting diameter, mm: 6
Cutting height, mm: 20
Total length, mm: 80
Shank diameter, mm: 12
Cutting part material: carbide
Diamond router cutter with coating 12x25x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter with coating 12x25x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
Product code: 1915
Write a rewiew
198.00€
Cutting diameter, mm: 12
Cutting height, mm: 25
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: PCD
Diamond router cutter 12x35x85x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter 12x35x85x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Product code: 921
1
63.00€
Cutting diameter, mm: 12
Cutting height, mm: 35
Total length, mm: 85
Shank diameter, mm: 12
Cutting part material: PCD
Nesting carbide cutter with coating CL-07 6x22x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
In stock
Bestseller
Nesting carbide cutter with coating CL-07 6x22x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 3120
1
25.20€
Cutting diameter, mm: 6
Cutting height, mm: 22
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: carbide
Nesting compression carbide cutter with coating CL-15 6x22x12 L82 HD (Taiwan) for cutting chipboard, MDF, plywood
In stock
Nesting compression carbide cutter with coating CL-15 6x22x12 L82 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 3433
Write a rewiew
30.60€
Cutting diameter, mm: 6
Cutting height, mm: 22
Total length, mm: 82
Shank diameter, mm: 12
Cutting part material: carbide
Diamond router cutter 16x25x85x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter 16x25x85x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
Product code: 922
Write a rewiew
97.20€
Cutting diameter, mm: 16
Cutting height, mm: 25
Total length, mm: 85
Shank diameter, mm: 16
Cutting part material: PCD
Diamond router cutter 16x43x85x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter 16x43x85x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
Product code: 923
Write a rewiew
171.00€
Cutting diameter, mm: 16
Cutting height, mm: 43
Total length, mm: 85
Shank diameter, mm: 16
Cutting part material: PCD
Diamond router cutter P003 20x28x90x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter P003 20x28x90x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard
Product code: 1042
1
225.00€
Cutting diameter, mm: 20
Cutting height, mm: 28
Total length, mm: 90
Shank diameter, mm: 20
Cutting part material: PCD
Diamond router cutter with coating 16x25x88x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter with coating 16x25x88x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
Product code: 3435
Write a rewiew
198.00€
Cutting diameter, mm: 16
Cutting height, mm: 25
Total length, mm: 88
Shank diameter, mm: 16
Cutting part material: PCD
Diamond router cutter with coating 16x45x105x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter with coating 16x45x105x16 Z=2+2 Nesting HD (Taiwan) for cutting chipboard
Product code: 3436
Write a rewiew
265.50€
Cutting diameter, mm: 16
Cutting height, mm: 45
Total length, mm: 105
Shank diameter, mm: 16
Cutting part material: PCD
Nesting carbide cutter with coating CL-07 6x30x12 L84 HD (Taiwan) for cutting chipboard, MDF, plywood
In stock
Bestseller
Nesting carbide cutter with coating CL-07 6x30x12 L84 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 1927
Write a rewiew
27.00€
Cutting diameter, mm: 6
Cutting height, mm: 30
Total length, mm: 84
Shank diameter, mm: 12
Cutting part material: carbide
Diamond router cutter 6x22x65x8 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter 6x22x65x8 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Product code: 3482
Write a rewiew
99.00€
Cutting diameter, mm: 6
Cutting height, mm: 22
Total length, mm: 65
Shank diameter, mm: 8
Cutting part material: PCD
Diamond router cutter 8x22x70x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter 8x22x70x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Product code: 1983
1
112.50€
Cutting diameter, mm: 8
Cutting height, mm: 22
Total length, mm: 70
Shank diameter, mm: 12
Cutting part material: PCD
Diamond router cutter with coating 20x35x97x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter with coating 20x35x97x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard
Product code: 1536
Write a rewiew
288.00€
Cutting diameter, mm: 20
Cutting height, mm: 35
Total length, mm: 97
Shank diameter, mm: 20
Cutting part material: PCD
Diamond router cutter with coating 8x22x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter with coating 8x22x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Product code: 3370
Write a rewiew
130.50€
Cutting diameter, mm: 8
Cutting height, mm: 22
Shank diameter, mm: 12
Cutting part material: PCD
Number of cutting edges, pcs: 1+1
Diamond router cutter with coating 20x45x105x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard
In stock
Diamond router cutter with coating 20x45x105x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard
Product code: 1784
Write a rewiew
324.00€
Cutting diameter, mm: 20
Cutting height, mm: 45
Total length, mm: 105
Shank diameter, mm: 20
Cutting part material: PCD
Nesting compression carbide cutter with coating CL-11 8x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
In stock
Bestseller
Nesting compression carbide cutter with coating CL-11 8x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 1926
1
36.00€
Cutting diameter, mm: 8
Cutting height, mm: 20
Total length, mm: 80
Shank diameter, mm: 12
Cutting part material: carbide
Nesting carbide cutter with coating CL-07 8x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
In stock
Nesting carbide cutter with coating CL-07 8x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
Product code: 3071
Write a rewiew
28.80€
Cutting diameter, mm: 8
Cutting height, mm: 20
Total length, mm: 75
Shank diameter, mm: 12
Cutting part material: carbide
Cutters for cutting - Customer Reviews
Nesting carbide cutter with coating CL-07 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting carbide cutter with coating CL-07 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
Oleksiy Naumenko
04/07/2024
A very nice cutter, we have been using it for more than two years! I have more than 1.5 thousand meters.
Diamond router cutter with coating 8x21x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard Diamond router cutter with coating 8x21x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
John Berkovich
03/06/2024
Very long life and good quality cutter. We use in on big nesting line, cutting many melamine boards and mdf
Nesting compression carbide cutter with coating CL-15 8x22x12 L78 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-15 8x22x12 L78 HD (Taiwan) for cutting chipboard, MDF, plywood
Patlan Ivan Vasyliovych
15/03/2024
The best cutter for cutting slabs without chips, 100% recommended
Nesting carbide cutter with coating CL-07 6x22x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting carbide cutter with coating CL-07 6x22x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
Mykola
29/09/2023
I have been working with it for half a year, I have small volumes, it cuts normally without chips
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Ivan Gal
17/05/2022
We make approximately 120-150 sheets 2800x2070. There are a lot of details in the sheet, that is, rectangular cuts along with curvilinear details. sometimes the milling cutters broke and we argued with Stancomplect for a replacement and so on, but then we found the reason - it was one of the crews that made the speed 20 m/min instead of 12, and then the milling cutters stopped breaking, sometimes they set the speed to 15, the milling cutter also works normally. We do it in one pass - this is the most important thing, because before that we worked with other cutters in 2 passes, so it took twice as much time to cut. and with these prices for 6 mm chipboard, this is a very big saving on material.
Diamond router cutter 12x25x75x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard Diamond router cutter 12x25x75x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Stancomplect
15/05/2022
Hello, Serhiy, thank you for the good review! If you want to work at a speed of 20 m/min - I advise you to try the X-CUT series coated diamond cutters, in order to find them - enter the numbers 1915, 1916 and 1917 in the search on the website, these are 3+3 cutters with DLC coating, diameters 8.
Diamond router cutter with coating 10x22x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard Diamond router cutter with coating 10x22x75x12 Z=3+3 Nesting X-Cut HD (Taiwan) for cutting chipboard
Viktor Voytenko
15/05/2022
Probably better than what we used before. Good cut, very long service life, we work at high speed, I think that the coating cools and makes it possible to make a cut quickly
Diamond router cutter 8x22x70x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard Diamond router cutter 8x22x70x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Andrei Kazanovsky
21/02/2022
An excellent cutter - the cut is normal 8 mm and the load on the axles and engine of the machine is less. And most importantly, less waste
Nesting compression carbide cutter with coating CL-11 8x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 8x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Sergey
21/03/2021
They used such a cutter with a diameter of 6 mm, but switched to 8, because it is possible to add more power to the feed and the resource is almost twice as much as that of 6
Diamond router cutter P003 20x28x90x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard Diamond router cutter P003 20x28x90x20 Z=3+3 Nesting HD (Taiwan) for cutting chipboard
Makar Malyi
16/10/2020
I have been working with such cutters for quite a long time and I can say that they fully meet the stated characteristics and my requirements. I process chipboard and MDF, I get about 200 sheets of chipboard before the first sharpening, as soon as I see chips I change it to processing MDF, and after that I send it to sharpening. I have 2 such cutters that I use alternately, the quality is excellent. Processing is carried out at a speed of 20-22 m/min.
Diamond router cutter 12x35x85x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard Diamond router cutter 12x35x85x12 Z=1+1 Nesting HD (Taiwan) for cutting chipboard
Nikolaych
05/06/2020
I’m happy with the cutter, I’ve already cut about 1000 square meters of facade at a speed of about 4.5 meters/minute, there are no signs of dullness or chips.
Nesting carbide cutter CL-07 10x40x12 L100 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting carbide cutter CL-07 10x40x12 L100 HD (Taiwan) for cutting chipboard, MDF, plywood
Valentin Kravchenko
15/03/2019
I recently took a batch of 10 of these cutters from the guys, and one cutter had a small chip on the cutting edge, took a photo, and sent the photo to the guys. They replaced my damaged cutter without any questions.
Nesting carbide cutter with coating CL-07 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting carbide cutter with coating CL-07 6x20x12 L75 HD (Taiwan) for cutting chipboard, MDF, plywood
Andrew Boldwin
29/05/2024
Very good cutter we enjoy it can do various materials.
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Ruslan
28/03/2024
Hello! Question for practitioners who cut laminated chipboards. For example, 16 mm laminated chipboard, are you interested in the feed speed, depth per pass and rotation speed? 150 sheets, well, I don’t really believe it... I’m taking a closer look at this cutter (because diamonds, due to the cost, are not suitable for the “everyday use” function) and I want more information. Good luck to everyone.
Nesting compression carbide cutter with coating CL-15 8x22x12 L78 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-15 8x22x12 L78 HD (Taiwan) for cutting chipboard, MDF, plywood
Oleg Kolomiets
23/01/2024
Tell me about this beautiful cutter - is it the same as CL-11 but with three faces? What makes it better than 011? Can you give a higher speed?
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Oleg Ivanovich
21/10/2023
I buy these cutters from the guys as soon as they appear, they are great for chipboard and laminated chipboard. And I take a three-feather 6 mm for MDF and plywood.. So from my experience and measurements: 1. Feeding speed - from 6 meters. 2. You can do 16 mm in 1 pass. 3. Rotation speed from 18,000 rpm. As for the number of sheets, on average we have laminated chipboards, somewhere around 120-150 sheets, depending on the quality of the sheets themselves.
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Sergey
15/04/2023
Good cutters. Sanding chipboard 16 mm, in one pass, feed 8-10 m/min, rotation speed 16000. Plywood 15 mm, in two passes 7.5/7.5 or 5/10, feed 8 m/min, second option 10/6 min, rotation 16000. The same 8 mm rakes 15 mm plywood in one pass, feed 6 m/min, rotation 18,000.
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Roman
10/03/2023
Over 400 meters of complex radius parts! Works and works, not a single chip. At these loads I would have already planted two 3-feather ones. It definitely paid off!
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Vitaly
07/02/2023
Answer based on practice. Cut 16 mm chipboard in one pass. Feed 6 - 7 m/min. Inclined plunge 3.5 m/min. Rotation speed 18000 rpm.
Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood Nesting compression carbide cutter with coating CL-11 6x20x12 L80 HD (Taiwan) for cutting chipboard, MDF, plywood
Vasily Khlust
25/12/2022
Excellent quality, I bought it from the guys at a promotional price... I wasn’t sure whether to take it or not, but in the end I took it and didn’t regret it... I recommend it to everyone
Popular categories

Cutters are cutting tools used in woodworking and furniture manufacturing. Another name for this tool is nesting cutters. The main purpose is rectilinear and curvilinear cutting of wood-like board materials: laminated chipboard, MDF, plywood. It is used as a working part in machining centers and CNC milling machines.

Features and benefits of cutters for cutting

HD Woodworking tools cutters

The Stancomplect website presents three-flute carbide cutters for nesting manufactured by HD Woodworking Tools. This tool for processing wood-like materials is a novelty in the European market.

Product advantages:

  • high-quality cut without chips,
  • high speed of work 8-12 m/min,
  • low cost cutter for cutting,
  • working part diameter 6, 8 and 10 mm,
  • cutting edge length from 20 to 40 mm.

Cutters for cutting plywood, MDF, chipboard

The high cutting speed improves productivity, and the low cost of the tool makes it possible to reduce the cost of production.

The small diameter of the working head (6 mm with a cutting edge height of 22 mm and 10 mm with a cutting edge height of 40 mm) results in low material consumption. Considering that when working with diamond cutters, a cut with a width of 12, 16 or 20 mm is formed, it is obvious that you can save a lot on waste when cutting blanks.

The height of the cutting part makes it possible to cut most materials used in furniture production in one pass. True for both straight and curved cuts.

Where to buy cutters for cutting at an affordable price

The Stancomplect company offers cutters for nesting on favorable terms. On our website you can pick up and order a cutting tool for cutting blanks in the furniture industry. The product is backed by a manufacturer's warranty.

Video of the cutting cutter